CONNECTION CORD L9217-02

Insulated BNC cable, BNC plugs on both ends, plastic connector housings, ferrite for noise suppression, 10 m cable length, rated voltage 300 V, CAT III 300 V / CAT II 600 V, made in Japan

The L9217-02 is an insulated BNC cable with BNC plugs on both ends and a cable length of 10 m. The cable is rated for a maximum voltage of 300 V and a maximum current of 0.2 A and is designed for measurement and instrumentation applications.
The insulated connector housings embed the BNC outer contact within a plastic body, preventing unintended contact with grounded metal surfaces and increasing electrical safety in higher-voltage measurement setups. The cable fulfills measurement category requirements of CAT III 300 V and CAT II 600 V.
A ferrite element on the cable increases the impedance for high-frequency common-mode currents on the cable shield and helps reduce interference in electrically noisy environments with fast switching signals such as inverter or motor test systems.
With its longer cable length, the L9217-02 is particularly useful when measurement instruments must be positioned further away from the measurement point. This situation often occurs when using a high-voltage divider such as the HIOKI VT1005, for example when the high-voltage tap point is located in a separated or restricted-access area during measurement.
Typical connections include linking the output of a current sensor interface to oscilloscopes or memory recorders, transmitting synchronization signals between instruments, or connecting the output of a high-voltage divider to a power analyzer.
The L9217-02 is manufactured in Japan.